EVS Multicam LSM, Руководство по эксплуатации

Страница: 177 / 242

7.6. Naming a Clip Using the Keywords
In the VGA Interface
1. Move the cursor to the desired keyword.
2. Press ALT+N .
3. The keyword is added at the end of the current name if there is enough space left.
Note
To clear the name of a clip:
1. Press ESC to empty the Name field.
2. Press F1 to assign this “empty name” to the clip.
7.7. Searching the Database Using the
Keywords
Keywords and ranking assigned to clips can be used to search the clips database.
In the Remote Panel Interface
• When the current element on the primary channel is a record train, the Search function
is directly available from the C position in the secondary menu. To call it, press MENU
to enter the secondary train menu, then press once the C key .
• When the current element on the primary channel is a clip, the Search function is still
available from the same location, but is “hidden” behind the Name function. To call it in
this case, press MENU to enter the secondary clip menu, then press twice the C key .
In both cases, the LCD display looks like (in LIST mode):
1 keyword89012 2 keyword89012 3 keyword89012
F1:action_1 F6:action_6
F2:action_2 F7:action_7
F3:action_3 F8:action_8
F4:action_4 F9:Prev.pagep.01
F5:action_5 F0:Next page
Reset Archive FromDate ToDate
Return *** Srch Loc Srch Net
OPERATION MANUAL Multicam LSM 12.05
7. Keyword Management 165