EVOnet network camera, Руководство пользователя

Страница: 16 / 74

User’s Manual
10
WARNING: ROUTE POWER CORDS SO THAT THEY ARE NOT A TRIPPING HAZARD.
MAKE CERTAIN THE POWER CORD WILL NOT BE PINCHED OR ABRADED BY
FURNITURE. DO NOT INSTALL POWER CORDS UNDER RUGS OR CARPET. USE
THE POWER CORD THAT HAS A GROUNDING PIN. IF YOUR POWER OUTLET DOES
NOT HAVE A GROUNDING PIN RECEPTACLE, DO NOT MODIFY THE PLUG. DO NOT
OVERLOAD THE CIRCUIT BY PLUGGING TOO MANY DEVICES INTO ONE CIRCUIT.
Mounting
< Vandal Dome Model > < Plastic Dome Model >
Mounting Template Mounting Template
1.
Screw the bottom cover to the wall or ceiling by using the mounting screws provided with the
camera. Use the mounting template provided with the camera.
2. Connect the external devices, network and power adapter.
3. Adjust the angle of the lens for the proper view angle. Refer to the View Angle section below
for details.
4. Adjust the focus and zoom by using the focus and zoom lever.
5. Fix the shield case in the tilt adjustment screw (IR LED non-supported model only).
6. If the camera is a vandal dome model, screw the dome cover to the bottom cover by using the
setscrew provided with the camera. If the camera is a plastic dome model, match the mark beside
the cable access hole of the bottom cover and the side cable access hole of the dome cover, and
then turn the dome cover clockwise to lock the dome cover to the bottom cover.
7. Apply power.
WARNING: You might need to reinforce the wall or ceiling. If the wall or ceiling is
not strong enough to support the camera, the camera might fall damaging the camera
or causing injuries.