EVOnet network camera, Руководство пользователя

Страница: 55 / 74

Network Camera
49
− Send Email : Check the box to send an email. Selecting Image Attachment attaches an event
detected image file (.JPG) to the email.
− Remote Callback : Check the box and select the remote systems to send a message (Not
supported for the WebGuard program).
− FTP Upload : Check the box to upload images to an ftp server.
− Record : Check the box to record video
.
NOTE: You must properly configure the settings related to each event action when setting them
up to enable event actions. Refer to the Event Action setup.
Tampering
Check the Tampering box to set up a tampering detection event. When a radical change is detected
in video (for example, the camera is moved, lens is blocked, etc), it considers it as an event.

Sensitivity
: Set the tampering sensitivity. The higher the number is, the more sensitive it is.
 Activation Time : Adjust the duration that tampering should last to be considered as a tampering
event. The camera will not consider any tampering as a tampering event if it lasts less than the
preset time.
 Use Ignoring Time : Set up the event ignoring time. The camera will not consider tampering
that occurs during the preset time span as an event.
 Event Action
: Check the box for each action the camera is to take when it detects a tampering.
− Alarm Out
: Check the box to trigger an alarm-output signal.
− Send Email : Check the box to send an email. Selecting Image Attachment attaches an event
detected image file (.JPG) to the email.