EVOnet network camera, Руководство пользователя

Страница: 48 / 74

User’s Manual
42
Settings : Click the tab to set up recording settings.
 Recording Stream
: Select a stream to use for recording.
− Time-Lapse/Pre-Event , Event : Allows using a different stream depending on the recording
mode.
 Time-Lapse/Pre-Event : Select the stream to use for recording when in the time-lapse
recording mode or for pre-event recording when in the event recording mode.
 Event : Select the stream to use for post-event recording when in the event recording mode.
− Preference
: Sets up the priority of a stream to use for recording.
 SD Recording
: Records video by using the Time-Lapse/Pre-Event and Event streams set
above.
 Network Recording : Records video by using the recording stream set in a remote program.
If a recording stream is not set up in a remote program, it uses the Default Record Stream
set during the
Video – Streaming setup.
 None : Records video by using whichever stream offers higher resolution between the SD
Recording stream and Network Recording stream.
 Network Recording Failover – Mode : Set up the network recording failover mode. It allows
recording video on the SD memory card when recording using a remote program fails. It records
video using the stream set during the
Recording Stream – Event setup above. If the recording
mode is set to Always – Time-Lapse in the Schedule tab, this will not be supported.
− Off
: Disables the network recording failover.
− Always : Records video continuously regardless of the recording schedule until recording using
a remote program works.
− On SD Schedule : Records video according to the recording schedule set in the Schedule
tab until recording using a remote program works.