EVOnet network camera, Руководство пользователя

Страница: 25 / 74

Network Camera
19
DVRNS
Check the
DVR Name Service
box to use the DVRNS function.
 DVRNS Server : Enter the IP address or domain name of the DVRNS server.
 Port : Set up the port number of the DVRNS server.
 Use NAT : Check the box when the camera uses a NAT (Network Address Translation) device
for network connection.
 Camera Name : Enter the camera name to be registered on the DVRNS server. Check whether
or not the name is available by clicking the
Check
button.
 Help Desk : Choosing the OK button registers the camera on the DVRNS server. Proper DVRNS
settings will display the help desk information of the DVRNS server.
NOTES:
 The DVRNS (DVR Name Service) function allows the camera to use dynamic IP addresses
for remote connection. When using this function, you can access the camera remotely by
using the camera name instead of its IP address. For the DVRNS function to work properly,
the camera should be registered on the DVRNS server, and the DVRNS server settings in
the INIT program for the camera should match the settings registered on the DVRNS server.
Any changes on the DVRNS server might cause improper operation.
 When LAN settings are changed, set up the DVRNS settings after saving your LAN changes
by clicking the OK button.
 You will need to get the IP address or domain name of the DVRNS server from your network
administrator. You can use the domain name instead of IP address if you set up the DNS
server during the IP Address setup.