EVOnet network camera, Руководство пользователя

Страница: 47 / 74

Network Camera
41
Check the Record box to enable recording on an SD memory card. Ensure that the SD memory
card (Class 6 or higher) is inserted properly.
 Total Capacity
: Displays the total capacity of the SD memory card when an SD memory card
is inserted properly.
 Format SD Card : Click the button to format the inserted SD memory card. Formatting the
SD memory card deletes all data saved on the SD memory card. Only users belonging to the
Administrator group can format the SD memory card.
 Record Audio : Select whether or not to record audio.
Schedule
: Click the tab to set up the recording schedule.
 Mode : Set up the recording mode.
− Always – Event : Records video in the event recording mode. Video is recorded only when
an event is detected.
− Always – Time-Lapse : Records video in the time-lapse recording mode. Video is recorded
continuously regardless of event detection.
− Always – Time-Lapse/Event
: Records video in the time-lapse recording mode while no
event is detected and changes to the event recording mode when an event is detected.
− Date/Time : Records video in the preset recording mode for each date and time setting. Select
On or Off and then select the recording mode. Set up or release the recording mode by clicking
or dragging the date and time area in the table. Selecting On or Off and clicking the Select
All/Clear All button sets up or releases the recording mode for all dates and time
.
 Duration : Select the time span to record video when in the event recording mode.
− Pre-Event : Select the time span to record video before an event is detected. The camera can
record a maximum of 60 MB of video. If the resolution, quality and frame rate for recording
are set too high and recording capacity during the preset time exceeds 60 MB, not all video
during the time will be recorded.
− Post-Event
: Select the time span to record video after an event is detected.