Evo ARP100, Инструкция по эксплуатации

Страница: 9 / 36

9
4. Attach the Rear Stabilizer & the Rear Handle
Be sure to fit the parts in the
same order as the diagrams
shown.
!
Make sure the bolts are fully
tightened with the allen key.
!
Be sure to fit the parts in the
same order as the diagrams
shown.
!
Make sure the rear stabilizer is
fully tightened with
the allen key.
!
4-1. Attach the Rear Stabilizerr
Remove the
•
four M8 x 20mm Hex Socket Head Bolt
(B5) & M8 x 16mm x1.5mm Flat Washer (B7 ) from
both sides of the rear end Rower Track with the 6mm
Allen Key provided as shown.
Attach the
•
Rear Stabilizer (C) to the rear end of the
Rower Track with four M8 x 20mm Hex Socket Head
Bolt (B5) & M8 x 16mm x1.5mm Flat Washer (B7) then
tighten these bolts with the 6mm Allen Key securely.
4-2. Attach the Rear Handle
Remove the
•
four M6 x 16mm Hex Socket Head Bolt (B9) from the
Rower Track with the 5mm Allen Key provided as shown.
Attach the
•
Rear Handle (G) to the centre position of the Rower
Track with four M6 x 16mm Hex Socket Head Bolt (B9) then
tighten these bolts with the 5mm Allen Key securely.
Cut off the
•
Cable Tie which secured the Seat Carriage Assembly in
front end of the Rower Track .
FIXINGS: FIXINGS:
x
4
FIXINGS: TOOLS:
Part
No.
B9
FIXINGS: FIXINGS:
x
4
FIXINGS: TOOLS:
Part
No.
B5
x
4
Part
No.
B7
Rower
Track
Rower
Track
Seat Carriage
Assembly