Evo ARP100, Инструкция по эксплуатации

Страница: 7 / 36

7
Be sure to fit the parts in the
same order as the diagrams
shown.
!
Make sure the bolts are fully
tightened with the allen key.
!
Make sure the moving wheels
on the front stabilizer face out
after assembly.
!
2-1. Remove the cardboard tube from the front end stabilizer bracket
Loosen the
•
two M8 x 16mm Allen Head Bolts from the cardboard tube and
remove the cardboard tube.
The two Allen Head Bolts and the cardboard tube are used for packaging
•
protection purpose, which won’t be used again during the assembly.
2-2 Attach the front Stabilizer
Remove the
•
four M8 x 16mm Hex Socket Head Bolt (B5) & M8 x 19mm x1.5mm
Curve Washer (B6) from the Front Stabilizer (B) with the 6mm Allen Key provided as
shown.
Attach the
•
Front Stabilizer (B) to the Main Frame (A) with four M8 x 16mm Hex
Socket Head Bolt (B5) & M8 x 19mm x1.5mm Curve Washer (B6) then tighten
these bolts with the 6mm Allen Key provided securely.
2. Attach the Front Stabilizer
FIXINGS: FIXINGS:
x
4
FIXINGS: TOOLS:
Part
No.
B5
x
4
Part
No.
B6
FIXINGS: FIXINGS:
x
2
FIXINGS: TOOLS:
Cardboard
Tube