background image

How to Take Care of Your Rower

26

Storage

Keep the equipment in a dry place with as little temperature variation as possible.  Try to protect from dust and always unplug 
when not in use (if applicable).

Troubleshooting

 

If you are having problems with your heart rate reading please note that some fibres used in clothes eg) polyester, create static 
electricity that may prevent a reliable heart rate reading.  Mobile phones, TV’s, microwaves and other electrical appliances that 
generate an electromagnetic field may also interfere with heart rate measurement.

If you are still having problems with your equipment, please get in touch with your local distributor using the details found in 
the Customer Support section on page 4.

Cleaning & Maintenance

Your rower is designed for indoor rowing used only and should not be used or stored in damp areas.   
Ensure you regularly check components for wear and make sure all the nuts & bolts are tightened before each exercise session. 

Rower Track

 – Clean daily before use.

   Use a warm, damp cloth or non-abrasive scouring pad to wipe the top surface of the track with soap water or any glass  

     cleaner.   Pay special attention on the both outside edges rails … remove any spots or dirt on it.

Seat Carriage Rollers

 – Clean daily before use.

   These rollers are easily damaged by dust & dirt to affect its smooth moving, so should be check and clean regularly  

     before user if possible.  Use a warm, damp cloth to clean the roller contact area with mild detergent if necessary.

Pulling Strap

 – Clean & check daily after use.

   Check for nicks or cuts and fraying that may weaken the pulling strap’s integrity even though it is made of superior  

     quality Nylon webbing fabric to make it extremely strong.  Also check the stitching at the handlebar end is intact.   
     Use a warm, damp cloth to clean the both surfaces of the pulling strap after every exercise if possible

Foot Rest Assembly

 –Clean & check every week before use.

   This Foot Rest Assembly had a lot of moving parts. It is essential that these parts are in good condition  all the times in used.  

    Check that if the foot strap buckle firmly holds the foot strap or not.    
    Check that if the foot heel self locking assembly is working correctly or not. 
    Make sure that if all of the nuts & bolts are tight and firm. 
    Use a warm, damp cloth to clean the foot heels contact area with mild detergent if necessary. 

Check and Replace the 

Console AA Battery

 

– approximately every 200 hours if equipped.

Clean for Dust on 

Fan Wheel Assembly

 – approximately every month. 

Check for loose 

Console arm

 – approximately every month.

Never remove the protective casing.

!

 If you have a problem with your equipment, before you do anything else please check that all 

the cables have been connected correctly.  Loose cables are very common and many problems 

can be solved by making sure the cables are properly connected

!

Loosen and remove the bolts of the rower seat to clean the rollers that inside of  the seat carriage

!

 Discontinue use immediately and contact your dealer for replacement if any of the symptoms are found.

!

Содержание ARP100





































Отзывы: