manualshive.com logo in svg

Evinrude e-tec 2005, Руководство пользователя

Поделиться
Скачать
Evinrude e-tec 2005 Скачать руководство пользователя страница 18

16

   Using Your E-TEC Outboard

OIL REQUIREMENTS

FUEL REQUIREMENTS

IMPORTANT: 

Always use fresh gasoline.

Gasoline will oxidize; the result is loss of oc-
tane, volatile compounds, and the production
of gum and varnish deposits which can de-
grade the fuel system.

The following outboard oils are recommend-
ed for use in your 

Evinrude E-TEC

 outboard:

•

Evinrude/Johnson XD100

; 

•

Evinrude/Johnson XD50

™; or

•

Evinrude/Johnson XD30

™.

Evinrude/Johnson

 brand oils are formulated

to give best engine performance while con-
trolling piston and combustion chamber de-
posits, providing superior lubrication, and
ensuring maximum spark plug life.

Evinrude/Johnson XD100

 oil is preferred

for your 

Evinrude E-TEC

 outboard.

 It is for-

mulated with special additives for cleaner
burning and lower consumption. This syn-
thetic blend oil also provides superior lubrica-
tion and maintains top performance.
For added protection and cost reduction, an
authorized dealer can program your 

Evinrude

E-TEC

 outboard 

EMM

 to cut normal oil con-

sumption in half using 

Evinrude/Johnson

XD100

 as compared to using a conventional

oil. 

Only an authorized 

Evinrude

 dealer

can program your outboard for this bene-
fit.

If 

Evinrude/Johnson 

brand oils are not avail-

able, you must use an oil that meets NMMA
TC-W3RL certification standards.

IMPORTANT: If your 

EMM

 has been pro-

grammed for 

Evinrude/Johnson

 

XD100

,

DO NOT

 use any other oil unless in an emer-

gency. If 

Evinrude/Johnson

 

XD100

 is tempo-

rarily unavailable, a 

one-time-only use 

of an

oil that meets NMMA TC-W3RL certification
standards is allowed. If you discontinue using

Evinrude/Johnson

 

XD100

, you MUST first re-

turn to your Dealer to have the 

EMM

 repro-

grammed back to the original factory setting.

IMPORTANT: 

Failure to follow oil specifica-

tions could void the engine warranty if a lubri-
cation-related failure occurs.

WARNING

Gasoline is extremely flammable and
highly explosive under certain condi-
tions. Follow the instructions in this
section explicitly. Improper handling of
fuel could result in property damage,
serious injury or death.

Leaking fuel is a fire and explosion haz-
ard. All parts in the fuel system should
be inspected frequently and replaced if
signs of deterioration or leakage are
found. Inspect the fuel system each
time you refuel, each time you remove
the engine cover and annually.

Follow these instructions to ensure
safety when handing fuel:

• Always turn off the engine before fuel-

ing.

• Never permit anyone other than an

adult to refill the fuel tank.

• Do not fill the fuel tank all the way to

the top or fuel may overflow when it
expands due to heating by the sun.

• Remove portable fuel tanks from the

boat before fueling.

• Always wipe off any fuel spillage.
• Do not smoke, or allow open flames,

or sparks or use electrical devices
such as cellular phones in the vicinity
of a fuel leak or while fueling.

• Always work in a well ventilated area.

Содержание e-tec 2005





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды