EVEREADY AS1-3KS-10.2, Руководство пользователя

Страница: 42 / 60

36
|
Limited Warranty Terms and Conditions –
Exclusions of Warranty
Exclusions of Warranty
This Warranty will not apply to a defect or fault to the extent to which one or
more of the conditions arises:
4.1
If the Warranty Period specified above has expired.
4.2 The Product(s) are damaged by the End-User’s improper usage, storage, or
operation, that does not conform with instructions in the User Manual.
4.3 Handling, installing (or removal and/or reinstallation), wiring or commissioning of
the Product other than in accordance with instructions in User Manual.
4.4 Operation, use or maintenance of the Product without following instructions in the
User Manuals or without reasonable care (including failure to maintain/clean the
Product in accordance with recommendations in Instruction/User Manuals).
4.5 Due to accidental damage, theft or vandalism, or use of the Product for a
purpose other than normal applications or in environmental conditions for which
the Products were not designed for or sold, or use of the Products outside the
specified or normal operating ranges.
4.6 As a result of changes which occur in the condition or operational performance
of the Product for climate or other environmental influence, foreign material
contamination (e.g. smoke, salt and chemicals, etc.), water entry, exposure to
excessive heat or solvents or because of use of the Product with insufficient
ventilation (in particular the maximum temperatures according to the User
Manual), exposure to strong vibrations, exposure to a strong magnetic field or
damage as result of Force Majeure event.
4.7
From normal wear and tear or when replacement or repair of parts would be part
of normal maintenance or service of the Product or where the damage is only to
surface coating, varnish, or enamel.
4.8 As a result of repairs, alterations or modifications to the Product which have been
performed by a third party not authorised by SolarBOS.
4.9 From the use of any spare parts not manufactured, sold, or approved by
SolarBOS in connection with the repair or replacement of Product, or as a result
of the interconnection of the Product.
4.10 Where the label or serial number of the Product is modified, altered or
not readable.
4.11
If damage has occurred during transportation.
4.12 Other damages not affecting energy generation, and which are of a visual nature
(e.g. surface scratching).
4.13 Product failure is not reported to SolarBOS within 2 weeks of appearance.
4.14 Purchase and installation of the Product in an area other than Australia.