EVBox BusinessLine, Руководство по установке и пусконаладке

Страница: 39 / 46

Problem Possible cause Solution
LED ring flashes red immediately when
the card is held against the reader.
Charge card is
not authorized
for charging at
this charging
station.
• Check that the charge card is
authorized for use on public
chargers. (Check by user.)
• Check the settings of your
charging station in your online
account. (Check by user.)
There is no
communication
with the
backend.
Use the EVBox Connect App to check
that the hub station or hub module
has a connection to the cellular
network or Wi-Fi.
LED ring shows constantly red. Grounding fault.
• Check that the electrical
installation is correctly grounded.
• If necessary, add additional
grounding closer to the
installation.
In a hub-satellite installation, one or
more LED rings constantly flash red.
Crossed
connection in
one of the
satellite RS485
connections.
Examine RS485 cabling and
connections.
No connection
with the hub
charging station.
Examine RS485 cabling and
connections.
LED ring always shows yellow.
Vehicle is fully
charged.
Disconnect the charging cable.
Charging station
is waiting for
vehicle. Check that the charging cable plug is
inserted into the vehicle correctly.
(Check by user.)
Vehicle is on a
timer.
Change the setting of the timer in the
vehicle. (Done by user.)
The charging
cable has a fault. Replace the charging cable. (Done by
user.)
Ground
resistance is too
high for the
vehicle type. Measure the ground resistance and
compare it to the resistance required
by the supplier of the vehicle, for
example Renault Zoe < 150 Ω.
5. Operation instructions
EN
35