EVBox BusinessLine, Руководство по установке и пусконаладке

Страница: 35 / 46

a. For a charging installation connected using the pre-programmed SIM:
◦
The applicable Charging Management Platform (CMP). (Do not manually add the CMP
URL.)
◦
The charge current. For a single charging station, the maximum charge current sets the
maximum output current for a single socket. For a Hub-Satellite installation, the maximum
charge current sets the maximum output current for the complete Hub-Satellite
installation.
b. For a charging installation connected to Wi-Fi:
◦
The Wi-Fi connection.
◦
The applicable Charging Management Platform (CMP). (Do not manually add the CMP
URL.)
◦
The charge current. For a single charging station, the maximum charge current sets the
maximum output current for a single socket. For a Hub-Satellite installation, the maximum
charge current sets the maximum output current for the complete Hub-Satellite
installation.
c. The following settings can also be configured using the app:
◦
Charger Access Control. Select the required access control for the charging station.
◦
LED Ring brightness.
◦
LED Ring ON or OFF when BusinessLine is in idle mode.
◦
Charging station name.
◦
Adding and removing charge cards used to activate a charging session (only for an offline
charging station)
◦
Updating the firmware.
7. Follow the instruction in the app to reboot BusinessLine.
8. Operate BusinessLine using an electric vehicle (EV) or the EVBox Test Box to confirm correct
operation. For a Hub-Satellite installation, operate each station in the installation to confirm correct
operation.
BusinessLine is connected to a CMP and is ready to use.
4. Installation instructions
EN
31