EVBox BusinessLine, Руководство по установке и пусконаладке

Страница: 20 / 46

Note:
The above illustration indicates a standard installation height. Observe and comply with the local
accessibility regulations.
Pre-installation checklist
• The local installation regulations are identified and are followed.
• All necessary permits are obtained from the local authority that has jurisdiction.
• The existing electrical load has been calculated to find the maximum operating current for the
charging station installation.
• For the BusinessLine without an RCBO : A miniature circuit breaker (MCB) and residual current
device (RCD, Type A, 30 mA AC leakage detection) are installed upstream and have ratings that
correspond to the local power supply as well as to the required charging power.
• The correct specification of power supply cable has been routed to the installation area, and there
is sufficient cable length to strip and connect the wires.
• The power supply cable remains within its bending tolerance during and after installation.
• The power supply cable and the optional Smart Charging network cable comply with the
specifications for the charging station that you are going to install.
• The required tools and materials are available on site. See Tools and material required on page 15 .
4.1.3. Choose mounting
EVBox BusinessLine charging stations can be mounted in the following ways:
Pole mounting in the ground or on the floor
BusinessLine charging stations, both single and double socket versions, can be mounted on an EVBox
EN
4. Installation instructions
16