EVBox BusinessLine, Руководство по установке и пусконаладке

Страница: 34 / 46

4.3.1. Configuration details
The BusinessLine configuration details are on the sticker in Part B of this manual. You will need the
configuration details of a Hub BusinessLine to commission a standalone Hub or a Hub-Satellite
installation.
4.3.2. Register BusinessLine with CMP
Activate the Hub BusinessLine with the CMP on the CMP website or using the CMP-specific app.
Contact the Charging Point Operator (CPO) for details about the charging station activation procedure.
4.3.3. Download EVBox Connect app
Use the EVBox Connect app to set up the Hub BusinessLine and connect it to the URL of the CMP.
Download and install the EVBox Connect app on your smartphone or tablet:
4.3.4. Commission EVBox BusinessLine
Make sure that BusinessLine is registered with the CMP before you connect power (see Register
BusinessLine with CMP on page 30 ).
1. Switch on electrical power to BusinessLine.
BusinessLine powers up and runs the start-up sequence.
Bluetooth is activated and BusinessLine searches for the device that is running the EVBox Connect
app.
2. On your smartphone or tablet, switch on Bluetooth and open the EVBox Connect app.
3. Select START PAIRING in the app.
A list of charging stations is shown.
4. Select the BusinessLine Bluetooth ID (registration number).
The LED ring shows flashing purple when pairing using Bluetooth is active.
5. Select the BusinessLine Bluetooth ID and follow the instructions in the app. The following details
from the BusinessLine configuration sticker (see
Configuration details on page 30 ) are required for
the app:
• The product Bluetooth ID.
• The product security code.
6. Use the app in the Installer mode to configure the following settings:
EN
4. Installation instructions
30