Eurotherm 216, Руководство пользователя

Страница: 36 / 40

B. 2
DEFAULT CONFIGURATION DEFAULT CONFIGURATION DEFAULT CONFIGURATION DEFAULT CONFIGURATION DEFAULT CONFIGURATION
P A R A M E T E R S
P A R A M E T E R S
P A R A M E T E R S P A R A M E T E R S
P A R A M E T E R S
The configuration parameters can be loaded with
predetermined default values. These data are the
typical values loaded in the instrument prior to
shipment from factory. To load the default values
proceed as follows:
a) In "normal display mode", press and
pushbutton for more than 3 secs.
0316 0316 0316 0316 0316 0216 0216 0216 0216 0216 (alternatively):
b ) Push the or pushbutton; display will
show:
c) Press to confirm.
d ) Press the pushbutton; display will show
the firmware version.
e ) Mantaining the pressure on the
pushbutton, push the pushbutton too.
The instrument will show:
f) Press pushbutton to select between table
1 (european) or table 2 (american) default
parameter set. The display will show:
g) Press pushbutton; the display will show:
This means that the loading procedure starts. After
about 3 seconds the loading procedure is
terminated.
OFF OFF
OFF OFF OFF
CnF CnF
CnF CnF CnF
O N O N
O N O N O N
CnF CnF
CnF CnF CnF
dl.f dl.f dl.f dl.f dl.f
CnF CnF
CnF CnF
CnF
O N O N
O N O N O N
dL.1 dL.1
dL.1 dL.1 dL.1
L.dt L.dt
L.dt L.dt
L.dt
Of Of
Of Of
Off ff
ff
Cnf Cnf
Cnf Cnf Cnf
Cnf Cnf Cnf Cnf Cnf
Cnf Cnf Cnf Cnf Cnf
A.01 A.01 A.01 A.01 A.01
A.01 A.01
A.01 A.01
A.01
216-316-A-00NEW.pmd 22/04/2004, 15.18 2