Eurotherm 216, Руководство пользователя

Страница: 7 / 40

1
GB GB GB GB GB
1. 1. 1. 1. 1. MOUNTING MOUNTING MOUNTING MOUNTING MOUNTING
Select a mounting location where there is
minimum vibration and the ambient temperature
ranges between 0 and 50°C (32 and 122°F).
The instrument can be mounted on a panel up to
15 mm thick with a square cutout of 45 x 45 mm.
For outline and cutout dimensions refer to
page A.4.
The surface texture of the panel must be better
than 6.3
µ
m.
The instrument is fitted with a rubber panel gasket.
To assure IP65 and NEMA 4 protection, insert the
panel gasket between the instrument and the
panel as shown in Fig. 1.
While holding the instrument against the panel
proceed as follows:
1) insert the gasket in the instrument case;
2) insert the instrument in the panel cutout;
3) pushing the instrument against the panel, insert
the mounting bracket;
4) with a screwdriver, turn the screws with a
torque between 0.3 and 0.4 Nm.
Fig. 1 PANEL MOUTING
screws
bracket
gasket
panel
02-0316-1-DER.pmd 22/04/2004, 16.19 1