Eurotherm 216, Руководство пользователя, Страница: 4 / 40

CONFIGURATION ENTRY & EXIT CONFIGURATION ENTRY & EXIT CONFIGURATION ENTRY & EXIT CONFIGURATION ENTRY & EXIT CONFIGURATION ENTRY & EXIT
Entry Entry
Entry Entry Entry
See operator manual page 7 section 4.3
To gain access to configuration you need to be
in the HOME screen.
While in the HOME screen press the PAGE key
followed by the SCROLL key
Keep both keys pressed for 3 seconds until the
display shows OFF
OFF OFF OFF OFF and ConF ConF ConF ConF ConF.
Now press either s or t to gain access by
changing OFF
OFF OFF OFF OFF to ON ON ON ON ON.
E x i t E x i t
E x i t E x i t E x i t
See operator manual page 14 after P28
To exit configuration you need to be at the Conf Conf Conf Conf Conf
screen
While in the Conf
Conf Conf Conf Conf screen press the PAGE key
followed by the SCROLL key
Keep both keys pressed for 3 seconds until the
display returns to normal numeric display.
POWER OUTPUT On/Off POWER OUTPUT On/Off POWER OUTPUT On/Off POWER OUTPUT On/Off POWER OUTPUT On/Off
These products allow you manually turn off the
output power.
See page 16 section 5.3
O f f O f f O f f O f f O f f To turn the power off press the
V
key
followed by the SCROLL key.
Keep both buttons pressed for 3 seconds until
the display shows OFF.
OFF. OFF. OFF. OFF.
O n O n O n O n O n To tune the power on press the
V
key
followed by the SCROLL key.
Keep both buttons pressed for 3 seconds until
the display returns to normal numeric display.
DIRECT SETPOINT ENTRY DIRECT SETPOINT ENTRY
DIRECT SETPOINT ENTRY DIRECT SETPOINT ENTRY DIRECT SETPOINT ENTRY
See page 16 section 5.6
While viewing the normal display hold either the
V
or
W
button for more than 2 seconds. The
value will change. After reaching the new set
point do not press any keys for a further 2
seconds and the new value will be entered.
PARAMETER ENTRY PARAMETER ENTRY PARAMETER ENTRY PARAMETER ENTRY PARAMETER ENTRY
See page 21 section 5.11
Whenever a parameter is changed using either
the
V
or
W
buttons there are 2 options:
Accept new value Accept new value Accept new value Accept new value Accept new value
Press the SCROLL
key
Cancel the change
Cancel the change
Cancel the change Cancel the change Cancel the change
Press the PAGE
key
LAMP TEST LAMP TEST
LAMP TEST LAMP TEST LAMP TEST
See page 21 section 5.10
The instrument display LED’s can be tested as
follows:
Activate Test Activate Test Activate Test Activate Test Activate Test Press
W
and together
Cancel Test Cancel Test Cancel Test Cancel Test Cancel Test Press
W
and together
A. 3
02_0316_A_DER.pmd 23/04/2004, 10.49 4