Eurotherm 216 Скачать руководство пользователя страница 28 | Manualshive

Страница: 28 / 40

Eurotherm 216 Скачать руководство пользователя страница 28

22

GB

GB

GB

GB

GB

Param. Description

SP

Set point (in eng. units).
Span: from rL to rH.

n.rS

Manual reset of the alarms.
This parameter is displayed if one alarm

has been programmed with manual
reset.

Set ON and press the pusbutton to

reset the alarms.

Sts

SP/SP2 or TIMER CONTROL

OFF

SP2

Set point 2 (in eng. units).

This parameter is present if P27 = 1, 2,
3, 4 or 5.

Span: from rL to rH.

t

time of the timer function (in minutes

and seconds).
This parameter is present if P27 greater
than 2.

Span: from 10 seconds (00.1) to 90

minutes (90.0).

nnn

Software key for parameter protection.
This parameter is skipped if P11 = 0 or 1.

ON = the instrument is in LOCK

condition

OFF = the instrument is in UNLOCK

condition.

To switch from LOCK to UNLOCK, set a
value equal to the value of parameter
P11.
To switch from UNLOCK to LOCK, set a
value different from the value of
parameter P11.
Span: 2/999

AL.1

Alarm 1 threshold (in eng. units).
This parameter is available only if
P5 = 1, 2 or 3.
Spans:
- From P2 to P3 for process alarm

(P5 = 1)

- From 0 to 500 units for band alarm

(P5 = 2).

- From -199 to 500 units for deviation

alarm (P5 = 3).

HS.1

Alarm 1 hysteresis (in % of P3 - P2
span).
This parameter is available only if
P5 = 1, 2 or 3.
Span: From 0.1% to 10.0% of the input
span or 1 LSD.
NOTE

NOTE

NOTE

NOTE

NOTE: If the hysteresis of a band alarm
is larger than the alarm band, the
instrument will use an hysteresis value
equal to the alarm band minus 1 digit.

AL.2

Alarm 2 threshold (in eng. units).
This parameter is available only if
P22 = 1, 2 or 3.
Spans:
- From P2 to P3 for process alarm

(P5 = 1)

- From 0 to 500 units for band alarm

(P5 = 2).

- From -199 to 500 units for deviation

alarm (P5 = 3).

HS.2

Alarm 1 hysteresis (in % of P3 - P2
span).
This parameter is available only if
P22 = 1, 2 or 3.
Span: From 0.1% to 10.0% of the input
span or 1 LSD.
NOTE

NOTE

NOTE

NOTE

NOTE: If the hysteresis of a band alarm
is larger than the alarm band, the
instrument will use an hysteresis value
equal to the alarm band minus 1 digit.

Pb

Proportional band (in % of P3 - P2 span).
Span:
- For one control output: from 1.0% to

99.9% (from 1.0% to 100.0% for
model 0216) of the input span (P3-P2).

02-0316-1-DER.pmd

22/04/2004, 16.19

22

«
...
26
27
28
29
30
...
»

Содержание 216









































Отзывы:

Нет отзывов