PART 2: SOFTWARE CONFIGURATION
97
110150-1001F
Host Connection Table
The
Host Connection Table
is part of the Terminal Client configuration, as shown in the following screen
capture.
At least one row must be configured in the
Host Connection Table
for it to work properly.
Note:
When adding or deleting rows of a
Host Connection Table
, make sure to click the
Insert Row#
or
Delete Row#
buttons within the brown section of the Terminal Client,
not the buttons at the very bottom of the main table.
The following table lists the buttons available in the
Host Connection Table
.
BUTTON
EXPLANATION
Insert Row#
Each row of the
Host Connection Table
exists as a set of
properties in a numbered table row within the Terminal Client
configuration. In order to insert a row in the table, enter a
number in the box between 1 and one greater than the highest
number of rows. Then click the
Insert Row#
button to insert a
blank row. This row must be filled in with all data required.
Delete Row#
In order to delete a row of the
Host Connection Table
, enter a
number in the box between 1 and the highest number of rows.
Then click the
Delete Row#
button to delete the row. Once a
row is deleted, it cannot be restored without inserting a row and
entering the data again.
The following screen capture shows the
Host Connection Table
.
Содержание ZyWAN
