Eurotech ZyWAN, Руководство пользователя

Страница: 94 / 130

ZyWAN - User Manual
94 110150-1001F
Chapter 8 Terminal Clients
The following screen capture shows the Terminal Clients tab.
The Terminal Client makes an outbound TCP/IP connection to a remote server, allowing pass-through
communication with a local serial port. Its serial port also provides AT command emulation to act similar to a
dial modem.
After setting all the Terminal Client properties, click the Submit New Configuration button before switching
to a new tab or closing the window.
Note:
Changes made to the Terminal Clients page take effect immediately after submitting
changes without requiring a reboot.
To allow one or more Terminal Client services to be configured, set Enable Terminal Clients to Yes . The
Table of Terminal Clients is displayed, as shown in the following screen capture.
The following table lists the buttons available.
BUTTON EXPLANATION
Insert Row# Each of the Terminal Clients exists as a large set of properties in
a numbered table row. In order to insert a row in the table, enter
a number in the box between 1 and one greater than the highest
number of rows. Then click the Insert Row# button to insert a
blank row. This row must be filled in with all data required.
Note that this table can get very large, with inner tables on each
Terminal Client table row. When adding or deleting a Terminal
Client configuration, make sure to click the Insert Row# or
Delete Row# buttons at the very bottom of the main table.
Delete Row# In order to delete a Terminal Client configuration (a row in the
main table), enter a number in the box between 1 and the
highest number of rows. Then click the Delete Row# button to
delete the row. Once a row is deleted, it cannot be restored
without inserting a row and entering the data again.