Eurotech ZyWAN, Руководство пользователя

Страница: 89 / 130

PART 2: SOFTWARE CONFIGURATION
89 110150-1001F
The Enable options determine which NMEA messages are sent through the COM port. The following table
describes these options.
OPTION EXPLANATION
Enable GPGLL? Select Yes to enable the GPGLL message in the NMEA data
stream.
Enable GPGGA? Select Yes to enable the GPGGA message in the NMEA data
stream.
Enable GPVTG? Select Yes to enable the GPVTG message in the NMEA data
stream.
Enable GPRMC? Select Yes to enable the GPVTG message in the NMEA data
stream.
Enable GPRMC? Select Yes to enable the GPRMC message in the NMEA data
stream.
Enable GPGSA? Select
Yes
to enable the
GPGSA
message in the NMEA data
stream.
Enable GPGSV? Select Yes to enable the GPGSV message in the NMEA data
stream.
Enable PFST,FOM? Select Yes to enable the PFST and FOM messages in the
NMEA data stream.
Enable GPS Terminal Server
The following screen capture shows the window if
Enable GPS Terminal Server?
is set to
Yes
.
Note:
If the GPS Terminal Server is configured here, it must also be included as a TCP port
in the “Open Ports” section of the Networking page, so the firewall will allow
connections to be made to the ZyWAN.
The following table lists the fields offered if Enable GPS Terminal Server? is set to Yes .
FIELD EXPLANATION
TCP Port To Listen On: Enter the port number to use for the terminal server which
delivers GPS data to a host. Port numbers must be an unused
port number between 1 and 65535.
Maximum Number of
Connections Allowed:
Enter the maximum number (between 1 and 8) of simultaneous
host connections which are allowed to connect to the ZyWAN to
receive streaming GPS data.