Eurotech ZyWAN Скачать руководство пользователя страница 67

Страница: 67 / 130

PART 2: SOFTWARE CONFIGURATION

110150-1001F

(E725 response)

HTTP Reply Status - 200
---> at
NO CARRIER
---> at
OK
---> at$nwactivation=940038,8018337159,8019539892
OK

Wait at least 5-10 seconds before moving on to the next step. If the word

ERROR

is displayed here, another attempt may be made to set the NAM

profile.

IOTA/OMA-DM

Provision

After one or both NAM profiles has been activated, select the button for

NAM 0

NAM 1

, and then click the

IOTA/OMA-DM Provision

button.

This provisions the profile by connecting to the cellular network using this

account.

Note:

The provisioning process requires an active cellular

connection to the service provider and may not be able to

be done in a roaming area. Make sure that a cellular

antenna is connected to the ZyWAN and that the ZyWAN

is located in an area where EvDO/CDMA service for the

service provider is available.

Status information is displayed in the large text area. This may take

several minutes for a response, possibly up to six minutes. The following

message is displayed:

Waiting for reply (this may take a few minutes to complete)

The normal response from this action should look something like the

following and end with the sentence

IOTA session completed

successfully!

Scroll to the bottom of the received text response to

validate that this message is given. The message should look something

like one of the following:

Содержание ZyWAN



































































































































Результаты поиска

Содержание ZyWAN

Отзывы:

Похожие инструкции для ZyWAN

Бренды по названию

Популярные бренды

Eurotech ZyWAN, Руководство пользователя

Результаты поиска

Содержание ZyWAN

Отзывы:

Похожие инструкции для ZyWAN

Бренды по названию

Популярные бренды