Eurotech ZyWAN, Руководство пользователя

Страница: 79 / 130

PART 2: SOFTWARE CONFIGURATION
79 110150-1001F
The following table lists the fields and options available in the Wifi tab if Use Dhcp? is set to No .
FIELD/OPTION EXPLANATION
IP Address Enter the specific numeric address for ZyWAN. Each of the four
fields must be a number between 1 and 255.
Subnet Mask Enter the subnet mask for this Ethernet network. Each of the
four fields must be a number between 0 and 255.
Default Gateway Enter the numeric address of the default gateway for this
network, if this interface should be used as the default route.
Each of the four fields must be a number between 1 and 255. If
this interface is not the default route, leave the
Default Gateway
blank.
Preferred DNS Server Enter the primary DNS server address. Each of the four fields
must be a number between 1 and 255. If DNS is not needed or
the server is unavailable, the DNS address may be left blank.
Alternate DNS Server Enter the secondary DNS server address. Each of the four
fields must be a number between 1 and 255. If DNS is not
needed or a secondary DNS server is unavailable, the DNS
address may be left blank.
Run DHCP Server
This option is available when the Mode is ad-hoc or master .
This allows the ZyWAN is to act as a DHCP server on the WiFi
network, assigning network addresses to other devices. Set this
to No if this option is not used.
DHCP Server
If Run DHCP Server is set to Yes , the DHCP Server Configuration table is displayed.