Euronda E9 Next 18L, Инструкция по эксплуатации

Страница: 84 / 88

Aquafilter
E9_Next_Ing_rev03 – 10/10/2018
83
E9 NEXT
APPENDIX 10 Description of optional devices
Aquafilter Deionizer
The Aquafilter Deionizer is a device that makes it possible to obtain water for feeding the tank of the steriliser
through direct connection to the water mains. The E9 steriliser-Aquafilter
®
deionizer interface allows the latter
to be directly controlled by the steriliser.
The principle on which the system is based is that of ionic exchange: a synthetic matrix is “charged” with
groups that are capable of exchanging hydrogen ions (H
+
) and hydroxide ions (OH
-
) with the cations and
anions present in the water. The deionizer contains a probe used for reading the specific conductivity and is
therefore capable of indicating when the characteristics of the water produced are no longer acceptable for
the system. The resins are capable of producing approximately 120 litres of water, but this value is strictly
dependant on the salinity of the inlet water, i.e. on the region in which the deionizer is installed. When the
active sites of the resin are saturated, and the probe detects that the quality of the outlet water has a higher
value than a certain pre-set value, a message for replacing the resins will appear on the display of the E9
NEXT steriliser. The quality of the water produced is also indicated by a led on the deionizer; as well as the
message on the display of the unit, therefore, the red light in the led also indicates that the quality of the
water produced by the deionizer is not suitable.
Aquabox
Aquabox is a device that allows Euronda autoclaves to be connected to an external supply of water that has
already been treated. It is ideal for clinics that already have water treatment systems based on osmosis or
other methods. It can be installed easily on all Euronda class B autoclave models.
Aquaosmo
Aquaosmo is a system that uses reverse osmosis to produce deionized water. A complex filtering system,
containing no fewer than 4 filters and 1 membrane, produces a large amount of water that is suitable for
supplying autoclaves and all of the equipment in dental practices, in accordance with the EN 13060 standard
(<15
µ
S/cm). A gun for spraying water manually can be also connected.
Aquaosmo is designed to be installed together with an Aquabox and connected directly to an autoclave. It
can supply up to 4 autoclaves at the same time if it is fitted with the special external accumulator tank kit,
which has a capacity of 12 litres. Aquaosmo does not need to be connected to an electrical power supply
and it can be installed directly on a work surface or inside a unit.