Euronda E9 Next 18L страница 51 Скачать руководство пользователя | Manualshive

Страница: 51 / 88

background image

Aquafilter

E9_Next_Ing_rev03 – 10/10/2018

50

E9 NEXT

CHAPTER 8

8.1 E-MEMORY SOFTWARE

The E-memory software is used to manage the data saved to the SD card by copying it to a PC database.

8.1.1 Minimum system requirements

•

Operating system: Windows 98 SE, Windows NT, Windows 2000, Windows XP.

•

Processor: Intel

®

Pentium

®

III, 600 MHz or higher.

•

Microsoft

®

Internet Explorer

®

5.0 or higher.

•

150 Mbyte of Hard Disk.

•

RAM: minimum 128 Mbyte, recommended 256 Mbyte or higher.

•

Display resolution 800x600 or higher and 65000 colours or higher.

•

Peripherals: CD ROM or DVD ROM.

•

Keyboard and mouse.

•

Printer.

•

SD card reader or USB interface.

8.1.2 Installing the E-Memory software

Make sure that the specifications of the computer and operating system are compatible with the
requirements of the E-memory Software (see “MINIMUM SYSTEM REQUIREMENTS”).
Make sure no other applications are running during the installation procedure.

N.B.:

in the example, the letter “D:\” is used to indicate the letter assigned to the CD-ROM drive: this may

differ from system to system.
Insert  the  CD-ROM  into  the  CD-ROM  drive;  the  E-Memory  Software  Installer  programme  will  start
automatically.
If this does not happen, proceed as follows:
a)  click on “Start” and select “Run”
b)  type [D:\setup\setup.exe] (where D: is the CD-ROM drive) and click on Next to run the installation

programme.
Click on Next to continue installation.

Note:

the default installation folder is [C:\Programmes\memory]. Click on “Browse” to change folder.

CAUTION:

at the beginning of the installation procedure the programme looks for all the components

required for installation: if one or more components are not found, the installation programme will install it
and will then ask the user to reboot the system.
After rebooting the PC, perform the above operation.

The programme will search for Microsoft Access 2000 Runtime or Microsoft Office 2000 or later releases.
If it fails to find one of these two components, the Access 2000 Run time installation screen will appear:
installation will take a few minutes after which the computer will have to be rebooted.
After rebooting, run the setup.exe file once again.

N.B.

if, after failing to find Access 2000 Runtime or Microsoft Office 2000, the system does not run the

Runtime installation programme automatically, consult the “TROUBLESHOOTING” paragraph.

If E-Memory Software is installed to Windows 98SE, they memory drivers will be installed first.
Afterwards, run the setup.exe file again.

«
...
49
50
51
52
53
...
»

Содержание E9 Next 18L

























































































Отзывы:

Нет отзывов

Похожие инструкции для E9 Next 18L

Бренд: miniland baby Страницы: 36

Бренд: BRC Страницы: 5

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды