Euronda E9 Next 18L Скачать руководство пользователя страница 68 | Manualshive

Страница: 68 / 88

background image

Aquafilter

E9_Next_Ing_rev03 – 10/10/2018

67

E9 NEXT

APPENDIX 3

Positioning the load

The way in which the load to sterilize is arranged is also considerably important to the sterilization process.
Always  observe  the  maximum  load  indicated  in  this  manual,  a  value  that  has  been  tested  by  the
manufacturer and that is therefore valid.

-  Always use the tray supports, to facilitate the circulation of steam.
-  Do not load trays that are not being used.
-  Where it is necessary to sterilise loose instruments, it is advisable to cover the tray  with sheets of Tray

Paper, to avoid any direct contact of the instruments with the tray.

- Ensure that instruments of different materials are separated and placed on different trays.
- For improved sterilisation results, open instruments such as pincers, scissors, or other composite

instruments.

- Position the instruments sufficiently distant from one another that they remain separate for the whole

sterilisation cycle.

-  Do not overfill the trays with instruments: overloading may compromise the quality of the sterilisation.
-  Mirrors should be placed glass side down.
-  Do not stack the trays on top of each other, always use the tray supports. It is necessary to leave a space

between each tray to allow for the circulation of steam during the sterilization phase and then to facilitate
drying.

- Place a chemical sterilisation indicator on each tray.

-

Tubes

- After the tubes have been cleaned normally, rinse them using water without pyrogene.
- Place them on the tray so that the two ends are open and so that they do not bend or twist.

-

Packages

- Place the packages upwards, next to each other, do not allow them to come into contact with the sides

of the chamber.

-

Material in pouches

- When sterilizing material in pouches, do not overlap the pouches on the trays (Fig. A3-1).
- Place the pouch with the transparent side face down (in contact with the tray) and with the paper face

up (Fig. A3-2). Instruments must be put into separate pouches.

Fig. A3-1

Fig. A3-2

After following the instructions above, put the tray holder and trays into the sterilization chamber.

CAUTION:

insert the tray support and the trays, paying particular attention not to damage

the door gasket.

PAPER

FILM (CLEAR SECTION)

«
...
66
67
68
69
70
...
»

Содержание E9 Next 18L

























































































Отзывы:

Нет отзывов

Похожие инструкции для E9 Next 18L

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды