ETS-Lindgren OMS, Руководство пользователя

Страница: 70 / 79

68
Programming the OMS www.ets-lindgren.com
www.fmgrupotec.com fmgrupotec@fmgrupotec.com 0034.903.360.306 Calle Algepser n16 Parque Empresarial Tactica- 46980 Paterna (Valencia)- España
S
ET
A
LARM
T
HRESHOLDS
To activate the audio alarm, the OMS must be installed with the audio
alarm option module.
This is used to adjust the oxygen concentration percentage that will activate
alarm levels 1 and 2. If the audio alarm output module is installed, it will also be
used to set the level at which the audio alarm will activate.
Step Display
1. Push the joystick to the right to
select the first submenu.
Set Relay 1 Alarm Threshold
2. This is the gas concentration at
which the first level alarm will
be activated. To display the
setting, push the joystick to the
right. Push the joystick up to
increase the value or down to
decrease the value, and then
Enter to accept the value.
The display will indicate a value
between 00.0% and 25.5%, and
then will default to the Set Relay 1
Alarm Threshold menu.
3. Push the joystick to the right to
select the next submenu.
Set Relay 2 Alarm Threshold
4. This is the gas concentration at
which the second level alarm
will be activated. To display the
setting, push the joystick to the
right. Push the joystick up to
increase the value or down to
decrease the value, and then
Enter to accept the value.
The display will indicate a value
between 00.0% and 25.5%, and
then will default to the Set Relay 2
Alarm Threshold menu.
5. Push the joystick down to
select the next submenu.
Set Audio Alarm Threshold