OPERATING INSTRUCTIONS
MD 180i/16 BASIC
MD 180i/16 BASIC CH
13 / 19
GB
Function
Customised setting
Functions
ON/OFF
Test
Reset
4 h ON/OFF
Bat ok
LS
MDi
Test
Test mode is used for testing the field of detection and takes approx. 5 min. During
this time, the lighting is switched on. Afterwards, the detector returns to the preset
operating mode.
Acknowledgement:
Movement detected in the field of detection is acknowledged with
two short flashes of the
blue LED
.
Functions
ON/OFF
Test
Reset
4 h ON/OFF
Bat ok
LS
MDi
Reset / settings
Temporarily set values are cleared. The detector returns to the preset operating mode.
Functions
ON/OFF
Test
Reset
4 h ON/OFF
Bat ok
LS
MDi
4 h ON / OFF
The lighting is switched on or off continuously for approx. 4 hours. If no movement is
detected in the field of detection and the preset switch-off delay time has elapsed, the
detector returns to the previous operating mode.
Note:
The
“4 h ON / OFF”
mode can be temporarily exited using the
“Reset”
function.
6.8
Programming the Mobil-PDi/MDi-universal
Programmed values are applied permanently.
1. Select the sub-item “Channel 1” in the “PDi/MDi” menu.
PDi/MDi
Remote control
Functions
Channel 1
Channel 2
System
Bat ok
LS
MDi
2. Then press the
button to enter programming mode. Acknowledgement: The blue
LED lights up permanently and the lighting is switched on continuously.
