OPERATING INSTRUCTIONS
MD 180i/16 BASIC
MD 180i/16 BASIC CH
8 / 19
GB
The LED feedback can be used to determine the mode that the wall-mounted motion
detector is currently switched to.
Example: Please release the button after approx. 3 seconds – the red LED lights up and
the
“4 h ON / OFF” mode is activated.
Further parameters can be configured via remote control. Remote controls can be
purchased as accessories.
6.2
Configuring parameters via remote control
Note: For optimum reception, when programming the settings, point the remote
control at the detector. Please note that if the sensor is exposed to direct sunlight, the
standard detection range of approx. 8 m may be dramatically reduced due to the sun's
infrared rays.
6.3
Mobil-PDi/MDi (EM10425509)