OPERATING INSTRUCTIONS
MD 180i/16 BASIC
MD 180i/16 BASIC CH
16 / 19
GB
6.8
12 h ON / OFF function
Programmed values are applied permanently.
1. Select the sub-item “Functions” in the “PDi/MDi” menu.
Functions
ON/OFF
Test
Reset
4 h ON/OFF
Bat ok
LS
MDi
2. Then press the
button to enter programming mode. Acknowledgement: The blue
LED lights up permanently and the lighting is switched on continuously.
3. Press the
button to exit programming mode.
Acknowledgement: The blue LED is switched off.
Function
Customised setting
Functions
ON/OFF
Test
Reset
4 h ON/OFF
Bat ok
LS
MDi
12 h ON / OFF
The lighting is switched on or off continuously for approx. 12 hours. If no movement is
detected in the field of detection and the preset switch-off delay time has elapsed, the
detector returns to the previous operating mode
.
Note:
The
“12 h ON / OFF”
mode can only be exited by entering programming mode and
using the
“Reset”
function.
Acknowledgement:
The
red
and
blue LEDs
flash three times.