OPERATING INSTRUCTIONS
MD 180i/16 BASIC
MD 180i/16 BASIC CH
4 / 19
GB
3
Operation / functionality
• The ESYLUX wall-mounted motion detector, which has a 180° field of detection,
is only suitable for wall mounting
• The range is up to 16 m in diameter at a recommended installation height
of 1.10 - 2.20 m
• The motion detector has one
channel (C1), which is used for presence-dependent
lighting control
• The setting options can vary depending on the remote control used; please see
“Configuring parameters via remote control”
3.1
Conditions in which the lighting is switched on
The lighting is switched on if the target brightness value is below the preset lux
value and movement is detected in the field of detection. Further movement is
acknowledged by the sensor with two short flashes of the
red LED (the LED can be
switched off; see “Configuring parameters via remote control”). Once the lighting has
been switched on, the sensor deactivates light measurement for this period.
3.2
Conditions in which the lighting is switched off
The lighting is switched off if no movement is detected in the field of detection and
the preset switch-off delay time has elapsed.