OPERATING INSTRUCTIONS
MD 180i/16 BASIC
MD 180i/16 BASIC CH
14 / 19
GB
3. Press the
button to exit programming mode.
Acknowledgement: The blue LED is switched off.
Function
Customised setting
Channel 1
Read-in
Light
Time
Reset
LEDs ON/OFF
Fully/semi-automatic
Bat ok
LS
MDi
Take a reading of the current ambient light value
The detector switches the lighting on if the target brightness value is below the preset
lux value and movement is detected in the field of detection.
Acknowledgement:
The
blue LED
and the lighting are switched off for approx. 5
seconds while the reading is taken.
Channel 1
Read-in
Light
Time
Reset
LEDs ON/OFF
Fully/semi-automatic
Bat ok
LS
MDi
Light
400 Lux
Bat ok
LS
MDi
Set the brightness switching value
Setting values:
10, 100, 250, 400, 600, 800, 2000 lux
The detector switches the lighting on if the target brightness value is below the preset
lux value and movement is detected in the field of detection.
Acknowledgement:
The
red
and
blue LEDs
flash three times in cycles if the selected
brightness switching value has been confirmed using the
button
.
Channel 1
Read-in
Light
Time
Reset
LEDs ON/OFF
Fully/semi-automatic
Bat ok
LS
MDi
Time
5 min
Bat ok
LS
MDi
Switch-off delay time
Setting values:
Short pulse, 1, 2, 5, 10 min.
Short pulse
As soon as movement has been detected in the field of detection, the detector switches
the lighting on for approx. 1 second and off for approx. 9 seconds. This function can be
used for operating automatic stairwell lights, for example.
Acknowledgement:
The
red LED
is switched on for 1 seconds and off for 9 seconds.
Switch-off delay time:
1, 2, 5, 10 min.
The switch-off delay time starts once movement is no longer detected in the field of detection.
Acknowledgement:
The
red
and
blue LEDs
flash three times in cycles.
Extend the switch-off delay time; max. 60 min.
By pressing the
and
buttons
repeatedly (max. four times), the switch-off
delay time can be extended as follows:
1 x = 15 min. Acknowledgement:
The
blue LED
flashes once
2 x = 30 min. Acknowledgement:
The
blue LED
flashes twice in 5-sec. cycles
3 x = 45 min. Acknowledgement:
The
blue LED
flashes three times in 5-sec. cycles
4 x = 60 min. Acknowledgement:
The
blue LED
flashes four times in 5-sec. cycles
