Essilor Medica 700, Руководство пользователя

Страница: 119 / 216

113
Wave Analyzer Medica 700 User Guide
113
Performing a Diagnostic
After selecting the diagnostic you wish to perform, the following screen opens:
If the new diagnostic selected, contains measurements that were already performed, the
device will ask you if you wish to repeat them. Select the measurements you wish to be
repeated, and then select, "
OK ". Continue on with the measurement as normal.
Adding measurements
To add measurements to your results screen, select the Measure button immediately after
completing the measurement. If no measurements are to be repeated, this popup menu will not
open. Select a diagnostic and continue with the examination. The additional will appear in your
results screen along with your previous measurements.
Note: When you repeat a measurement via the Measure button, the previous results
are erased.
Exporting the Results to a Phoropter
From the Results screen , you can export test results to a phoropter that is either connected
directly to the unit through its serial port or its USB port, or can be accessed over the network
to which the unit is connected.
36