12
Kongsberg V-series
For proper clamping, keep distance e 20 mm,
0.8 inch as a minimum.
To achieve material through-cut, the distance d
must be at least 18 mm, 0.7 inch.
Balanced Bits
Bits with balanced surface should have a
clamping length f of min. 20 mm/0.8 inches.
Maximum balancing length g is 12 mm/0.5
inches.
12.6.10 False Air valve
MultiCUT is equipped with a
False Air Valve
.
When milling small parts, use the
False Air Valve
to reduce the suction force.
12.6.11 Tool Adjustment
For FlexiHead tool positions, complete relevant adjustments as described for FlexiHead.
For the router position, complete the following adjustments:
Tool Height
Correct tool height relative to table top.
The tool tip should touch the material surface.
81
