12
Kongsberg V-series
Sleeve Adjustment Tools
are available in two
versions, with different depths.
Use the
Sleeve Adjustment Tool
in order to:
• Ensure correct insertion of milling bit.
• Ensure equal bit height when replacing
a milling bit. Additional tool height
adjustment not necessary.
• Safe operation; the sharp part of the milling
bit is protected.
Use the 20 mm / 0.8 in.
Sleeve Adjustment
Tool
for milling materials up to 16 mm / 0.6 in.
Use the 28 mm / 1.1 in.
Sleeve Adjustment
Tool
for milling materials from 16 mm / 0.6 in.
to 26 mm / 1 in.
At left, a milling bit is inserted into the
Sleeve
Adjustment Tool
, ready to be mounted into
the chuck.
If a bit is stuck
If a
Milling Bit
is stuck in the
chuck
, the probable cause is low
air pressure
.
To release a
Milling Bit
from the
chuck
, a pressure of 7 bar is required.
If necessary, check the
Pressurized Air Regulator Valve
, or the
Pressurized Air
source.
If the bit is still stuck, see the
Chuck Change and Cleaning
on page 76 section about how to
unscrew the chuck.
12.6.7 Chuck Change and Cleaning
Clean the
taper
and the
chuck
regularly for proper operation and optimum life time; at least
once a week, but more often if necessary.
76
