EsiWelma Sensigas EW40, Инструкция по установке и эксплуатации

Страница: 69 / 96

Type / N.
Rev. Data Page Total pages
EW095.605 5 November 2010
69 96
EsiWelma
s.r.l.
Press ESC several times to
confirm the selection and return
to the main menu.
9.7 Modbus address
Before connecting the UCE40... control unit to a monitoring system, the operator must make
sure the Modbus address for the protocol messages is correct. The default Modbus address
is 5, but it is possible to select a different value from 1 to 64. When selecting it is necessary
to make sure there are no conflicts with any other Modbus field devices in the monitoring
system. On the “MODBUS CONFIGURATION”
page, the value can be changed as follows:
Use the and keys to increase/decrease the Modbus address number to the right of
the pointer.
M A I N M E N U
C O N F I G U R A T I O N M E N U
D I A G N O S T I C
D I S P L A Y S E T T I N G S
Fig. 9.33
C O N F I G U R A T I O N M E N U
M O D B U S A D D R E S S
M O D B U S B A U D R A T E
M O D B U S P O R T
Fig. 9.37
M O D B U S A D D R E S S
A D D R E S S : 5
Fig. 9.39
M A I N M E N U
I N S T A L L A T I O N S T A T E
S E N S O R L I S T
E X P I R E D S E N S O R L I S T
Fig. 9.32
C O N F I G U R A T I O N M E N U
N E W I N S T A L L A T I O N
N E W C E N T R A L U N I T
D E L E T E D E V I C E
Fig. 9.35
M A I N M E N U
C O N F I G U R A T I O N M E N U
D I A G N O S T I C
D I S P L A Y S E T T I N G S
Fig. 9.34
C O N F I G U R A T I O N M E N U
N E W I N S T A L L A T I O N
N E W C E N T R A L U N I T
D E L E T E D E V I C E
Fig. 9.36
C O N F I G U R A T I O N M E N U
M O D B U S A D D R E S S
M O D B U S B A U D R A T E
M O D B U S P O R T
Fig. 9.38
M A I N M E N U
I N S T A L L A T I O N S T A T E
S E N S O R L I S T
E X P I R E D S E N S O R L I S T
Fig. 9.40