EsiWelma Sensigas EW40, Инструкция по установке и эксплуатации

Страница: 46 / 96

Type / N.
Rev. Data Page Total pages
EW095.605 5 November 2010
46 96
EsiWelma
s.r.l.
When an input of the AM changes status, depending on how this was configured with the
relative DIP switch as alarm type (PR, 1t or 2t), the corresponding relays on the assigned
relay module are commanded.
To move the screen horizontally, press
To move down, press
To move up, press
For example, for the first input of a second AM to assign, move the pointer to the right as
shown below.
Press ESC to confirm the associations and return to the “main menu”.
After the AM association operation is completed, the system is operational.
NOTE
If a system does not include the installation of relay modules and display modules,
the "ASSIGNMENT" panels are not active. In any case, all the AM inputs installed,
without exception, will be assigned to the relay module inside the control unit (RM0)
Press the key indicated above to
move the pointer to the right
1 - 1 1 - 2 1 - 3 1 - 4
R M 0 1 “ “ “
D M 0 1 “ “ “ “
Fig. 6.36
M A I N M E N U
I N S T A L L A T I O N S T A T E
S E N S O R L I S T
E X P I R E D S E N S O R L I S T
Fig. 6.39
1 - 1 1 - 2 1 - 3 1 - 4
R M 0 1 “ “ “ “
R M 0 2 “ “ “ “
D M 0 1 “ “ “ “
Fig. 6.37
1 - 2 1 - 3 1 - 4 2 - 1
R M 0 1 “ “ “ “
R M 0 2 “ “ “ “
D M 0 1 “ “ “ “
Fig. 6.38
Press the key
indicated above to
move the pointer to
the right