EsiWelma Sensigas EW40, Инструкция по установке и эксплуатации

Страница: 59 / 96

Type / N.
Rev. Data Page Total pages
EW095.605 5 November 2010
59 96
EsiWelma
s.r.l.
Press down for 5
seconds until you
hear a "BEEP"
press (+) to increase
the value and (-) to
decrease it
To change the threshold or status parameters of the detector, go to setting and proceed as
follows.
Press to move the cursor to the right and, using the criteria described above, it is
possible to change the other threshold set-points on the detector. To change its operating
status, move the setting cursor as shown in Fig. 8.18 then continue as follows:
Press again and the status will become “FAIL”, press once more and it will return to
" ACTIVATED”. Press ESC to confirm the operating status selected and to exit from the
setting screen. For information on the meaning of “ACTIVATED”, “DEACTIVATED” and
“FAIL” status, see Chapters 8.1, 8.2 and 8.3.
It is possible to view the operating status of the RM, DM and AM modules using the same
procedure adopted for the detectors.
S 0 1 P r 1 T 2 T
S E T 1 0 2 0 4 0 L E L
G A S : C H 4 S T A T E : A C T I V
V A L : 0 0 T I M E : 2 5 5
Fig. 8.12
S 0 1 P r 1 T 2 T
S E T
1 0 2 0 4 0 L E L
G A S : C H 4 S T A T E : A C T I V
V A L : 0 0 T I M E : 2 5 5
Fig. 8.13
S 0 1 P r 1 T 2 T
S E T
1 1 2 0 4 0 L E L
G A S : C H 4 S T A T E : A C T I V
V A L : 0 0 T I M E : 2 5 5
Fig. 8.15
S 0 1 P r 1 T 2 T
S E T
1 1 2 0 4 0 L E L
G A S : C H 4 S T A T E : A C T I V
V A L : 0 0 T I M E : 2 5 5
Fig. 8.16
S 0 1 P r 1 T 2 T
S E T
1 0 2 0 4 0 L E L
G A S : C H 4 S T A T E : A C T I V
V A L : 0 0 T I M E : 2 5 5
Fig. 8.17
S 0 1 P r 1 T 2 T
S E T 1 0 2 0 4 0 L E L
G A S : C H 4
S T A T E : A C T I V
V A L : 0 0 0 T I M E : 2 5 5
Fig. 8.18
S 0 1 P r 1 T 2 T
S E T
1 0 2 0 4 0 L E L
G A S : C H 4 S T A T E : A C T I V
V A L : 0 0 T I M E : 2 5 5
Fig. 8.14
S 0 1 P r 1 T 2 T
S E T 1 0 2 0 4 0 L E L
G A S : C H 4
S T A T E : D E A C T
V A L : 0 0 0 T I M E : 2 5 5
Fig. 8.19