manualshive.com logo in svg

eschmann Little Sister SES 2010, Руководство пользователя, Страница: 42 / 42

Поделиться
Скачать
eschmann Little Sister SES 2010 Скачать руководство пользователя страница 42

Warranty

This product and purchased accessories are warranted for a 

minimum period of 12 months to be free from defects in materials 

and workmanship at the time of delivery. 
Eschmann will be under no liability for any defect arising from 

fair wear and tear, negligence, wilful damage, misuse, abnormal 

working conditions, failure to follow the manufacturer’s 

instructions, unauthorised alteration or repair of hardware, 

unauthorised or accidental alteration of software or configuration, 

lost profits, commercial loss, economic loss, or loss arising from 

personal injury. We may, at our discretion, raise a charge for 

any faults repaired that fall outside the warranty cover. Where 

charges are necessary, replacement parts will be charged at 

manufacturers’ list prices and labour will be charged at the 

prevailing hourly rate. Repairs performed by Eschmann carry a 

3-month parts and labour warranty

.

The details in this manual are correct at time of going to press and 

supersede details previously published elsewhere. Information, 

technical specifications and statements made in this publication 

may be subject to change without prior notice

Service

The Autoclave must only be serviced by an Eschmann or 

Eschmann trained engineer. We also recommend a program of 

ongoing service and maintenance using only Eschmann spare 

parts. 
Eschmann products are supported by a worldwide network of fully 

trained engineers, offering high quality Eschmann spare parts. For 

further information on the range of Service Contracts available, 

please contact your local Eschmann representative.

Eschmann can be contacted during normal office hours. Please 

quote the model and serial number exactly as printed on the 

product label. Please use the contact details below.
IMPORTANT:  The design of the autoclave pressure vessel is 

certified by a third party accredited test house to International 

Standards. In order to ensure safety and to comply with UK 

and/or International regulations, the vessel and fittings should 

be inspected by a competent person at regular intervals. We 

recommend that this is carried out at least once every 14 months 

by an Eschmann or Eschmann trained engineer.

 

Eschmann Technologies Limited

 

Eschmann House, 15 Peter Road, Lancing, 

West Sussex, BN15 8TJ United Kingdom

t: 

+44 (0)1903 753322

 

e: 

[email protected] 

w: 

eschmann.co.uk

Ingenuity in  

infection control  

since 1830 

490725-05

Содержание Little Sister SES 2010











































Отзывы:

Нет отзывов