eschmann Little Sister SES 2010, Руководство пользователя, Страница: 17 / 42

490725-05
17
Setting a delayed start
1
SES 2010 09:00
SES 2010 09:00
Start Cycle
SES 2010 09:00
Cycle Type
Cycle No
The cycle has not yet started
The Autoclave is loaded
From the Open Door, Close Door, or Cycle Start
screens:
Press to view the Cycle Selection
menu.
Delayed Start allows you to delay the start of a
cycle by up to 23 hours and 59 minutes.
2
Cycle Select
SES 2010 09:00
Cycle Selection
Non-vacuum
134° N
Select the cycle to delay
Use the up/down buttons to highlight
your chosen cycle in the blue area of the
screen.
Do not press.
Press to view the Delay Start screen.
Press to return
without change.
3
Cycle Delay
Previous
SES 2010 09:00
0 2 0 0
Start delay (H/M)
Cycle
134°
N
Non-vacuum 134°
Delay by (h/m) : 2:00
Delay Start
Set a delayed start time
Press to accept the delay time shown
and go to
5
below
or
Press to enter a new delay time.
Press to return
without change.
4
Cycle Delay
Keypad
SES 2010 09:00
2 3
4 5 6
7 8 9
0
1
00:00
Insert the Delay Time
Enter the delay time in hours and minutes using
the 24 hour clock.
Press
OK
to accept.
The maximum delay
time is 23 hours and 59
minutes.
Press to return
without change.
5
Start Cycle
SES 2010 09:00
Cycle Type
Cycle No
Start the Delayed Cycle
Press to start the delay cycle
The door will lock and the delayed cycle
will start.
The delay time begins
when the Start button is
pressed.
6
SES 2010 09:00
Cycle Type
Cycle No
Temp °C
Pressure kPa
02:30
Delayed Cycle Running
When the count down is complete (0:00), the
Run Screen will be displayed for the duration of
the cycle.
Press to stop the cycle.
A count down is shown on
the screen.
If drying is selected,
the door will need to be
opened onto the catch
upon completion of the
sterilisation phase. Refer
to Section 7.
Toggle to select drying
ON/OFF