eschmann Little Sister SES 2010, Руководство пользователя, Страница: 21 / 42

490725-05
21
Viewing the Records Menu
1
SES 2010 09:00
SES 2010 09:00
Start Cycle
SES 2010
09:00
Cycle Type
Cycle No
The cycle has not yet started
From the Open Door, Close Door, or Cycle Start
screens:
Press to view the Records menu.
The Records menu
contains two search
criteria:
2
Download Records -
select from:
Successful Cycles
All Cycles
Failed Cycles
3
Download Records -
select from:
By Date
All since last Download
By Cycle Number
2
Settings
SES 2010
09:00
Download Records
Successful Cycles
All Cycles
Failed Cycles
Download records
Use the up/down buttons to highlight
your chosen setting in blue.
Press to accept and view the next
screen.
Press to return
without change.
3
Settings
SES 2010 09:00
Download Records
By Date
All Since Last Down-
By Cycle Number
Download records
Use the up/down buttons to highlight
your chosen setting in blue.
Press to accept and view the next
screen.
All Since Last Download will download all
records produced since the last time it was used
to download records.
Press to return
without change.
Selecting All Since Last
Download will begin the
download immediately.
See below when selecting
By Cycle Number and By
Date.
13.2 Records Menu
By cycle number
1
SES 2010
09:00
Set FROM / TO Cycle Numbers
High Security Current Cycle Number
00000
Set FROM / TO Cycle Numbers
Use the up/down buttons to highlight
your chosen setting in blue.
Press to edit the selected cycle number.
Press to accept the cycle numbers
shown and begin download.
Press to return
without change.
The upper box (FROM)
requires a cycle number.
The lower box (TO)
always shows current
cycle number, though this
may be edited.
2
Cycle Delay
Keypad
SES 2010 09:00
2 3
4 5 6
7 8 9
0
1
00000
Insert the cycle number
Enter the cycle number in the keypad. Zero is
not accepted.
Press OK to accept the cycle number entered.
Press to return
without change.
Before beginning to download cycle records, insert a
USB Memory Stick into the autoclave’s USB port
(Refer to Fig. 1, page 4). Note: Exit the Records menu before removing the
USB device.