ESAB Aristo U82, Инструкция по эксплуатации

Страница: 50 / 96

9 CONFIGURATION MENU
0460 896 274
- 50 -
© ESAB AB 2013
9.1.1 Lock code status
In lock code status, you can activate/deactivate the lock function without deleting the
existing lock code in the event you deactivate the function. If no lock code is stored and you
try to activate the code lock, the keyboard is displayed for entering a new lock code.
To exit lock status.
When you are in the measure screen or the fast mode menu and the code lock is
deactivated , you can exit these menus without restrictions by press QUIT or MENU in order
to go to the menu menu.
If it is activated and you try to exit, leave REM or press software button 2ND FUNCT, the
following screen appears in order to warn the user about the lock protection.
PRESS ENTER FOR LOCK CODE...
Here you can select QUIT to undo and return to the previous menu, or proceed by pressing
ENTER to enter the lock code.
You will then move to the menu with the keyboard, where you can enter the code. Press
ENTER after each character, and confirm the code by pressing DONE.
The following text box appears:
UNIT UNLOCKED!
If the code is not correct, an error message is displayed that offers the option of trying again
or returning to the original menu, i.e. the measure screen or the fast mode menu.
If the code is correct, all blocks to other menus will be removed, although the code lock
remains activated . This means that you can leave the measure screen and the fast mode
menu temporarily, yet still retain the lock status when you return to these menus.
9.1.2 Specify/edit lock code
In specify/edit lock code, you can edit an existing lock code or enter a new one. A lock code
can comprise a maximum of 16 optional letters or figures.
9.2 Remote controls
Main menu → Configuration menu → Remote controls
Non CAN-bus connected remote control units must be connected via a remote control
adapter. The SuperPulse method is not supported by this function.
After connection, activate the remote control unit in the measure screen with the soft key
REMOTE.