ES AWH11-V5+, Руководство пользователя

Страница: 41 / 86

3. Usage
41
【 】
Temperature Info
For example, if the setting is made like below:
Parameter No.
Meaning
Value
9
20 00
Normal Shower Time (for unit with
heat recovery function only)
Anti-legionella function
10
11
Parameter No.
Meaning Range Default Value
0
00 00
0(off), 1(on)
00 00-23 59
Anti-legionella function
Anti-legionella function starting time
Pump anti-block running time
12
Parameter No.
Meaning
Range Default Value
00 00
00 00-23 59
Pump anti-block running time
Quiet operation
13
14
Parameter No.
Meaning
Range Default Value
00 00
00 00
00 00-23 59
00 00-23 59
Quiet operation starting time
Quiet operation ending time
All temperature information of current running statue can be checked via operation panel in both ON/OFF status
.
Press and for 5 seconds
in main interface, to activate
inquiry of current running status.
Press or to check
all working status in sequence.
Number of
parameter Value of
parameter
If at time 19:00 in the day, shower water is still not enough for shower, unit will activate standard hot water operation,
instead of using recovered heat to heat up the shower water.
Parameter 10 is used to activated or deactivate Anti-legionella function.
Parameter 11 is used to set the starting time of Anti-legionella function.
During the hot water operation, unit will record the highest hot water temperature it produced. If in 7*24 hours time
period, unit has not reached the set water temperature for "anti
-
legionella function
" (
set in Advanced Menu
)
even
once
,
then unit will activate anti
-
legionella operation at
"
Anti
--
legionella function starting time
".
For details for "anti-legionella" function, please contact your installer or read chapter "Advanced Opeartion" in our manual.
Circulation water pump may easily get blocked if it has not working for long time. In order to avoide this from happening,
circulation water pump will be activated for 1 minute, if it is not working at this set clock time every day.
Thanks for the DC technology applied in this system, unit can lower both its compressor speed and fan rotating speed,
to get a ultra low noise operation in this set time period.