ES AWH11-V5+, Руководство пользователя

Страница: 16 / 86

2. Installation
2.4.2 Installation
User can either use the dedicated mounting bracket from the supplier, or prepare a suitable bracket for the
unit installation. Make sure the installation meets following requirements:
1) The unit must be installed on flat concrete blocks, or a dedicated mounting bracket. The bracket should
be able to support at least 5 times of unit’s weight.
2) All nuts must be tightened after the bracket is fixed; otherwise, it may cause damage to the equipment.
3) User should double check and make sure the installation of unit is firm enough.
4) The bracket can be of stainless steel, galvanized steel, aluminum and other materials as required by the
user.
5) Besides the mounting bracket, the user can also install the monoblock unit on two concrete blocks, or a
raised concrete platform. Please make sure that the unit is securely fastened after installation.
6) Please see the dimensions of unit when choose a suitable wall bracket. monoblock
≥
500mm
◆
Hole for piping kits should lean to outside a little bit
(
≥
8 degrees), to keep rain water or condensate water
from flowing back indoors.
≥8°
Sleeve
Shield
16