□ Probe offsets:
Auto Leveling sensor offset setting
□ Steps/mm:
Number of steps of motor rotation per millimeter printer moves
□ TMC Drivers:
stepper motor driver setting
□
Probe X offs:
Auto Leveling sensor X axis offset setting
□
Probe Y offs:
Auto Leveling sensor Y axis offset setting
□
Probe Z offs:
Auto Leveling sensor Z axis offset setting
□
X Steps/mm:
Number of steps of motor rotation per millimeter printer
X axis moves. The parameter is related to the type of motor, the number
of teeth and the pitch of the synchronous wheel
The parameter is related to the type of motor, the number of teeth and
the pitch of the synchronous wheel
□
Y steps/mm:
Number of steps of motor rotation per millimeter
printer Y axis moves
□
Z steps/mm:
Number of steps of motor rotation per millimeter printer Z
axis moves. The parameter is related to motor type and Z-axis screw type
□
E steps/mm:
Number of steps of motor rotation per millimeter printer
extruder rotates, the parameter is related to motor type and feeder
gear type
□
X Steps/mm:
TMC drivers current setting
□
Stepping Mode:
Switch the working mode of the stepper motor driver,
on means silent mode on, off means silent mode off
□
Sensorless Homing:
Infinite Limit switch function Settings, mainly to
adjust the X/Y axis of the stepper motor driver sensitivity.
The sensitivity of the driver to the resistance when the XY axis moving
and homing.
It should be noted that too high the value is likely to lead to higher
sensitivity value, resulting in failure of the homing.
14
Содержание ER-20
