Eryone ER-20, Руководство пользователя

Страница: 14 / 30

□ Preheat ABS: Preheat menu.
Preheat the nozzle, heated bed, or both. When using this feature, the
heating component will enter the heating state according to the ABS
preheating parameters preset in the firmware.
□ Advanced Settings: Advanced parameter setting menu
□ Set Home offsets: Sets the current printer's coordinate value as the
home offsets
□ Velocity: Printer speed parameter control menu
□ Acceleration: Acceleration control menu
□ Jerk: Accelerating arc parameter setting
■ Configuration:
This menu is the most complicated part of the LCD menu. It is
recommended that you do not change any parameters in this menu if you
are unclear.
Advanced Settings includes advanced parameter setting, auto
leveling sensor parameter setting, etc
□ Vmax X: X-axis movement speed upper limit
□ Vmax Y: Z-axis movement speed upper limit
□ Vmax Z: Z-axis movement speed upper limit
□ Vmax E: Upper limit of the rotation speed of the extruder
□ Vmax Min: Maximum value of Printer moving speed
□ Vtrav Min E: Minimum value of Printer deadhead moving speed
□ Accel: The overall acceleration value of the printer
□ A-Retract: Printer extruder motor retract acceleration setting
□ A-Travel: Printer travel acceleration maximum value setting
□ A max X: X axis moving acceleration maximum value setting
□ A max Y: Y axis moving acceleration maximum value setting
□ A max Z: Z axis moving acceleration maximum value setting
□ A max E: Extruder acceleration maximum value setting
13