Eryone ER-20, Руководство пользователя

Страница: 13 / 30

□ Bed: Heated bed temperature parameters setting.
□ Fan speed: Fan speed control.
□ Nozzle: Nozzle temperature parameter setting.
Nozzle cooling fan speed setting, using PWM to adjust fan speed, the
parameters are 0~255, corresponding to running at a rate percentage of
0~100%.
Generally do not let its speed below 20%, otherwise situation that fans can
not work properly might appear.
□ Preheat PLA: Preheat menu.
Preheat the nozzle, heated bed, or both. When using this feature, the
heating component will enter the heating state according to the PLA
preheating parameters preset in the firmware.
■ Motion:
Printer motion parts control menu to move every axis.
Motion Menu
■ Temperature:
Menu for nozzle temperature, heated bed temperature and cooling
fan speed
□ Move axis: Move each axis
□ Move X: 3 type of mode,10mm/1mm/0.1mm
□ Move X: 3 type of mode,10mm/1mm/0.1mm
□ Move Z: 4 type of mode,10mm/1mm/0.1mm/0.025mm
□ Move E: Extruder extrusion filament (need Preheat first), 3 type of
mode,10mm/1mm/0.1mm
□ Auto home: Auto home all three axes of the printer XYZ
□ Level Bed: Using this feature to auto level the printer（The offset point
needs to be set first, This will be explained on the Probe Z Offset menu)
□ Fade Height: Fade the amount of Mesh Based Compensation over a
specified height. At the specified height, no correction is applied and
natural printer kinematics take over. If no number is specified for the
command, 10mm is assumed to be reasonable.
□ Disable the Stepper: After the stepper motor is disabled, the motor
self-lock function is unlocked and the stepping motor can be moved
manually
□ Bed leveling: Enable the auto bed leveling or not(Default enable)
12