Eryone ER-20, Руководство пользователя

Страница: 17 / 30

■ Change Filament:
This menu can be used in the printing process of the
printer to help users quickly replace the filament.
□ Preheat PLA: This menu differs from the Temperature menu , the
refueling after using the preset PLA's preheating parameters
■ About Printer:
This button includes information about this printer.
□ Printer info: Printer firmware information
□ Board info: Printer motherboard information
□ Thermistors:
Printer thermistors information
■ Change the Media:
Replace the printed SD card (This option is not
available on The ER-20)
■ Change the Media:
Select the slice file from the SD card
□ Preheat ABS:
This menu differs from the Temperature menu , the
refueling after using the preset ABS's preheating parameters
□ Preheat custom:
This menu allows the operator to customize
the temperature parameters for preheating and refueling.
□ Preheat ABS conf: Printer ABS preheating parameters configuration menu.
On this menu you can adjust the heating temperature values of the nozzle
and the heated bed.
□ Store Setting: Save the currently unsaved parameters to the printer.
Load Setting: Load printer default parameters
□ Restore Defaults: Reset printer factory parameters
16