Erreka VULCAN S, Руководство по установке

Страница: 47 / 96

In
stalacion_77
.fm - 28/7/11
English
VULCAN S hydraulic operator
43
INSTALLATION
1
NECESSARY TOOLS
Set of screwdrivers
Fixed wrenches
Socket wrench (8 mm)
Set of Allen keys
Pincers for Faston terminals
Marker pencil
Level
Tape measure
Welding machine

Use the welding machine in line with the use
instructions.
2
INITIAL CONDITIONS AND CHECKS
Initial conditions of the gate

Check that the size of the gate is within the
admissible range of the operator (see the
technical characteristics of the operator).

If the gate to be automated has a passage gate,
install a safety device to prevent the operator
from operating with the passage gate open.

The gate must have an in-ground central stop and
an in-ground stop in opening.

The gate must be easy to manipulate manually,
namely:
•
This must be balanced, in order to ensure the effort
made by the motor is minimum.
•
There should be no stiffness throughout its travel.

Do not install the operator in a gate which does
not work correctly in manual operation, as this
may lead to accidents. Repair the gate before
installing.
Environmental conditions
 This device is not suitable for installation in
inflammable or explosive environments.  Check that the admissible environmental
temperature range for the operator is suitable
for the location.
Electrical power supply installation
 The electrical connections shall be made in line
with the instructions in the control panel
manual.

The electrical cable section is indicated in: “Fig. 1
Elements of the complete installation” on page 39.